50W Power Supply for Laser Engraver Machine
RM700.00
This power supply can be directly connected to CO2 laser engraving machines 50W or lower. It can receive feedback from the interface, enabling precise control and accurate testing of the laser’s working current.
𝐕𝐞𝐫𝐬𝐚𝐭𝐢𝐥𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲 𝐚𝐧𝐝 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: Our LasercutMY 50W Power Supply for Laser Machine boasts exceptional compatibility, working seamlessly with 45W and 50W laser tubes from various manufacturers. With its quick response speed and high-performance capabilities, this power supply delivers impressive cutting power while prolonging the service life of your laser tube.
Real-Time Display: Fine tune your power settings with instant digital readout of your laser's current in mA, avoiding harmful overdriving and prolonging your tube's life
Extra Protection: This laser power supply upgrade will give your machine additional protection from variable mains power and any open-circuit faults; the wide screw-on cap on the live laser tube wire means you'll never again need to solder dangerous anode connections
Simple Installation: Your terminals can be easily reused from most standard setups; when they can't, each connection port is clearly labeled and easy to use
2 Months Warranty: This versatile CO2 laser power supply has been rigorously tested to provide the highest quality and longevity on the market; LasercutMY backs it with a strong 2 months warranty
Specification:
- Material: Iron, Copper, ABS
- Color: Black
- Dimensions:7 x 6.3 x 3.5 in. (17x16x9 cm)
- Rated Power: 50W
- Input Power: 110V/220V AC
- Input AC Frequency: 47-440Hz
- Output Voltage: 28kV DC
- Output Current: 22mA DC
- Efficiency: 91%
- Service Life (MTTF): 30,000 hr.
- Response Time: 1 millisecond
- High-Level Voltage: 3.0V
- Low-Level Voltage: 0.7V
- Safe Humidity: 85%
- Operational Temp. Range: 14 to 104°F (-10 to 40°C)
- Overcurrent Protection: 130%
- Open-Circuit Protection: Short Time
- Cooling System: Forced-Air Cooling (FAC)
- Temperature Testing: Full Load for 12 Hours at 140°F (60°C)
- Antiknock Testing: 3D Motion for 2 Hours
- Start/Stop Testing: 500x in 7 sec.
Package Includes:
1 x 50W Laser Power Supply
Warranty:
No need to worry! We offer a 2-month warranty on all power supply unit.
Additional information
| Weight | 1.8 kg |
|---|---|
| Dimensions | 28 × 16 × 21 cm |
Related products
-
Sale!
CW5000 Industrial Chiller
Original price was: RM2,850.00.RM2,200.00Current price is: RM2,200.00.
CW5000 Industrial Chiller
Original price was: RM2,850.00.RM2,200.00Current price is: RM2,200.00.Our industrial water chillers are known for their consistency, durability, and compatibility with CO2 Laser Engraver machines 50W and up. This accessory is essential for full-time engraving professionals and hobbyists who like to work for more than 6 hours a day, as well those who work in warmer ambient temperatures above 30℃.
Quick View -
Reflective Mirror Set For Laser Engraver Machine
RM250.00
Reflective Mirror Set For Laser Engraver Machine
RM250.00LasercutMY’s new generation of molybdenum engraving mirrors are 20mm across and 3mm thick, offering λ/2 flatness with better than 95% clear aperture and centration under three arc minutes for exceptional optical performance.
Quick View -
50W CO2 Laser Tube For Laser Cutting Machine
RM950.00
50W CO2 Laser Tube For Laser Cutting Machine
RM950.00Power: 50W; Length: 1000mm; Diameter: 50mm; Item includes: 1 x tube.
Wires Pre-Connected: For easy installation, the high voltage end and low voltage port have been connected in advance. If any support needed when installing, feel free to contact us.
Quality Assurance: Each tube is tested before shipping and we will provide a safe packaging. If any problem after receives the tube, do let us know. We are willing to provide the best services and will provide 2 months warranty (except man-made damage).
Application: This CO2 laser tube is mainly used for laser cutter or laser engraving machine, which can carve and cut acrylic, cloth, leather, bamboo, wood, engraving, etc.
Wire preconnected: the wires of the two ends, positive pole and negative pole, are connected in advance. Just connect with the wires of your laser machine correspondingly, then make sure the insulation. If any question during installing, feel free to let us know.Quick View -
80W CO2 Laser Tube for Laser Cutting Machine
RM1,900.00
80W CO2 Laser Tube for Laser Cutting Machine
RM1,900.00Replace your old laser tube and optimize your laser engraver and cutter machine’s performance with LasercutMy’s highly efficient 80W CO2 laser tube! Made of tough borosilicate glass, this 1250 mm long 80 mm wide CO2 laser tube is superior to its competitors as it incorporates gold catalyst nanocoating and high-end German technology into the engineering of its glass tube construction, making it more durable to withstand high temperature and pressure.
Quick View
Reviews
There are no reviews yet.