How to Manually Add a Laser Machine To Lightburn   If you want to add a laser that isn't connected to your computer or is linked through a network, you can do it manually.   Open the Devices Window: Click the Devices button in the Laser window to access the...

This article discusses the importance of maintaining clean optics in laser engravers, specifically mirrors and focus lenses, to ensure optimal performance. It explains how airborne particles, smoke, and debris from the laser cutting process can contaminate mirrors and lenses, leading to reduced efficiency, potential overheating, and permanent damage.

The article provides step-by-step instructions for cleaning the mirrors and lenses using isopropyl alcohol, proper tools, and techniques. It emphasizes regular cleaning and inspection to extend the lifespan of the equipment and maintain high-quality results.

In this article, we will discuss the recommended maintenance to ensure your CO2 laser engraver machine is working at its best performance.

Laser Machine Installation Guide (320 Basic & 640 Basic Models)

The installation process for the 320 Basic and 640 Basic laser cutting machines is similar, with potential variations in hose and plug positions depending on the model.

Step-by-Step Guide:

1. Connect Water Pump: Attach the two white hoses. One goes to the water pump, the other to the water container (filled to 3/4).

2. Connect Air Pump: Attach the "Air Assist" hose to the silver air pump for smooth cutting and engraving.

3. Install Air Ventilation: Set up the ventilation system at the back to expel dust and smoke.

4. Connect Power Cable: Plug into the machine, but avoid sharing with high-power devices.

5. Obtain Machine ID: Find the ID number on the motherboard.

6. Connect USB Cable: Link the machine to your computer.

7. Insert Orange Dongle: Ensure the dongle is connected for machine operation.

8. Turn on the Machine: The setup is complete and your CO2 Laser Engraving Machine is ready to use.

Now, you're all set to start creating your products!