26 Steps : Create Your First Product with CorelLASER Software

To use the Laser Engraving Machine, you need to master on how to use CorelLaser software.

It might seem hard at first, but with continues effort and interest, you will definitely be an expert in using it in a short time. 

You can download the CorelLaser software HERE.

Steps On Using CorelLASER Software to Create Products

Step 1: Artwork is made by using Adobe Illustrator (AI) 

 Step 2: Click file and save as 

Step 3: Name the folder 

Step 4: Save As Illustrator 9, This is the most important step

 Step 5: Open CorelLASER Software

Step 6: Click File > Import 

Choose the artwork file and click import 

Step 7: Artwork has been successfully imported 

Step 8: Right click and ungroup

Step 9 : Select only the red outlines 

Step 10: Click Outline Pen, located at the bottom right 

Step 11: Change the Width to 'None'

Step 12: Proceed by clicking OK 

Step 13: Imagine the red part is still there; select the red part along with the black artwork

Step 14: Click Engraving, second tool from left 

STEP 15: Pop-Up CorelDraw 12 Engraving Manager will appear

STEP16: Set Speed to 150mm/

Step 17: Adjust the position of the Laser Head by moving the artwork in the white area

 \

Step 18: Set the Power Machine laser to 15%

Step 19: Click STARTING

STEP 20: Press Control + Z and select only the red part 

Step 21: Click Cutting, third tool from the left 

STEP 22:  CorelDraw 12 Engraving manager will appear and ensure the style is set to Cutting

STEP 23: Set the speed to 10mm/s 

Step 24: DON'T CHANGE THE LASER HEAD POSITION, ensure it is the same position with the previous engraving

STEP 25: Set Power 35%

STEP 26: Press STARTING 

Congratulations! You have completed the steps for using CorelLASER software to create a product and successfully created your first item.

Keep creating and producing high-quality laser-engraved crafts.

Click the link below to learn how to maintain the laser engraving machine.

>>> STEPS TO MAINTAIN LASER ENGRAVING MACHINE