Start by clicking the Devices button in the Laser window to open the Devices window.   In the Devices window, click the 'Find My Laser' button, and you'll see this screen:   Make sure your laser is powered on, connected to your computer with a USB cable, and has completed any startup sequence it needs to,...

How to Manually Add a Laser Machine To Lightburn   If you want to add a laser that isn't connected to your computer or is linked through a network, you can do it manually.   Open the Devices Window: Click the Devices button in the Laser window to access the...

Dalam artikel ini, kami akan membincangkan penyelenggaraan yang disyorkan untuk memastikan mesin pengukir laser CO2 anda berfungsi pada prestasi terbaiknya.

Laser Machine Installation Guide (320 Basic & 640 Basic Models)

The installation process for the 320 Basic and 640 Basic laser cutting machines is similar, with potential variations in hose and plug positions depending on the model.

Step-by-Step Guide:

1. Connect Water Pump: Attach the two white hoses. One goes to the water pump, the other to the water container (filled to 3/4).

2. Connect Air Pump: Attach the "Air Assist" hose to the silver air pump for smooth cutting and engraving.

3. Install Air Ventilation: Set up the ventilation system at the back to expel dust and smoke.

4. Connect Power Cable: Plug into the machine, but avoid sharing with high-power devices.

5. Obtain Machine ID: Find the ID number on the motherboard.

6. Connect USB Cable: Link the machine to your computer.

7. Insert Orange Dongle: Ensure the dongle is connected for machine operation.

8. Turn on the Machine: The setup is complete and your CO2 Laser Engraving Machine is ready to use.

Now, you're all set to start creating your products!